Quick Tips to Fix Wavlink Router Flashing Red Light
Are you facing red light on your Wavlink router frequently? If your answer is yes then don’t worry; you’re not alone in this. Many people encounter the same, and the good news is that there are some simple steps you can take to fix the Wavlink router flashing red issue. In this blog, we’ll walk you through easy-to-follow tips to get your Wavlink router up and running smoothly. Keep reading to find out more!
Before we dive into the troubleshooting tips, we would like to tell you about the reasons behind the red light first. By knowing the reasons you will get the root of the issue. Plus, this will make it easy to fix the problem in no time.
Reasons: Wavlink Router Flashing Red
Here we discuss some most common reasons for Wavlink router blinking red light:
Technical Glitches
The very first reason why you face the blinking red light on your device is temporary hiccups in it. Yes, you read it right. It is seen that when the Wavlink router becomes the victim of technical glitches it usually shows the red light.
Outdated Firmware
We all know that firmware plays a very important role in network devices. But when it runs on its outdated version, then it put the device at higher risk due to which the device indicates red light.
Broken Cables
The next possible reason is a broken and defective Ethernet cable. Maybe the cable you use for the connections is broken or damaged somewhere.
Weak Internet Connection
You can also face the red light on the router if it not getting sufficient internet speed from the host modem or internet service provider.
Wireless Interference
There is a chance that your device network gets interrupted by electronic devices as these devices have electromagnetic waves that cause WiFi interference.
These were the reasons that mostly cause the Wavlink router blinking red issues. This issue can be fixed easily by implementing the further mentioned troubleshooting tips that work effectively and quickly.
Tips to Fix Wavlink Router Flashing Red
Check Your Internet Connection
Before diving into complex troubleshooting, ensure that your internet connection is stable. You can do this by contacting the internet service provider. Ask him if the internet package that you use is active or needs to recharge. Also, ask him about the internet speed. If you see everything is fine from his side, then perform the next hack.
Restart Your Router
A quick and effective solution is to restart your router. Unplug the power cable from the router, wait for about 10-15 seconds, and then plug it back in. Give it a minute to boot up and stabilize. Often, this simple step resolves many connectivity issues, including the flashing red light.
Inspect Network Cables
As we mentioned above, loose or damaged network cables can also trigger the Wavlink router flashing red light issue. Make sure that all cables are securely plugged into the correct ports on both the router and the modem. If any cables are frayed or visibly damaged, consider replacing them.
Check for Firmware Updates
Now you should check the firmware version of your device. To do this you need to log in to your router’s web interface using a computer or smartphone. Navigate to the firmware update section and check if there’s a newer version available. If so, follow the instructions to update the firmware.
Perform a Factory Reset
If none of the above steps work, you might need to perform a factory reset on your router. This will revert all settings to their default configurations. Look for a small reset button on your router; usually, you’ll need to press and hold it for about 10-15 seconds. After the reset, you’ll need to perform the router setup process. However, you can also use these steps if you performed Wavlink WiFi extender setup in your house.
Hence, these are the solutions that you can use to fix the Wavlink router flashing red light issue in no time.
Conclusion,
Dealing with a Wavlink router flashing red light issue might seem daunting, but with the help of above mentioned quick tips, you can often resolve the issue without much hassle. Once the issue is resolved you will get the blazing fast internet throughout the house.