How to Reset WavLink WiFi Extender?
WavLink WiFi extender is one of the ultimate devices when it comes to fulfilling daily internet needs of users all over the world. Once you are done with setting up the extender, it will remove all blind spots of your house. In addition to that, the extender helps in improving existing signal strength up to 30 percent in area where you have never expected WiFi before. But, there are times when a user is forced to reset WavLink WiFi extender.
If you are also amongst those users who are forced to reset WavLink range extender, then this post is specifically written for you. Here, we have jotted the topmost reasons that would have led you to experience the issue along with the hacks that will work in an instant to prevent you from experiencing the same issue again in future. Let’s get the ball rolling!
What Forced You to Reset WavLink WiFi Extender?
The topmost reasons that would have forced you to reset WavLink WiFi extender are highlighted below. You just have to keep the reasons into consideration and also the fixes provided further. Why? Keeping the reasons and fixes in mind will prevent you committing the same mistakes again that forces you reset your extender more frequent. Keep reading!
- Experiencing red light issue with the extender
- WavLink WiFi extender not working
- Unable to install the extender
- wifi wavlink com setup not accessible
- wifi.wavlink.com web address not working
- WavLink WiFi extender connected but no internet
- Extender keeps rebooting
- Unable to set up the extender or can’t access internet after setting up the extender
- Can’t connect router and the extender
- Facing issues while accessing wifi wavlink com setup wizard
- Firmware update failed, unable to update extender’s firmware, or the file got corrupted
These are only the common reasons! There can be many more apart from them that would have forced you to reset WavLink WiFi extender. Need not to worry! We have got you covered. Now, we are going to make you familiar with the best fixes, when applied, you will never reset your range extender again back to factory default values.
[Fixes] Never Reset WavLink WiFi Extender Again
Here comes the fixes that will never let you reset your range extender again:
Check the Power Supply
Improper power supply can be one of the reasons behind WavLink extender not working issue. And, when the extender is not working as per expectations, users have no choice than to reset it. The best way to prevent this from happening, ensure that your extender is properly plugged in and receiving steady power supply from its respective wall outlet. Also, the extender’s wall plug shouldn’t be damaged.
If the extender is still not working even after providing it a steady power from a working socket, don’t reset, simply power cycle it. How, just unplug it, wait for 2 minutes, plug it back in again, and it will start working for you without resetting.
This would be a relevant fix for Wavlink extender red light issue as well. And, if the extender keeps rebooting after power cycling, try keeping it off for another 5 minutes. But, don’t reset it for such simple thing.
Here “it” we have referred to your WavLink WiFi extender.
Follow WavLink Extender Setup Steps Correctly
If you are unable to install the extender, then make sure that you have followed the instructions in the exact given order mentioned on wifi wavlink com setup wizard. On the off chance, the setup wizard is not accessible to you, then just ensure that:
- You are connected to WavLink extender’s WiFi
- The web browser you are using to access the setup wizard is up-to-date
- browsing history is cleared and there are no typing errors in the default web address of your range extender i.e. wifi.wavlink.com.
Verify Internet-related Issues with Your ISP
If you are unable to access the internet after setting up the extender, then confirm whether you have performed the process correctly or not. And, if you have followed the process correctly and you are still unable to access the internet, you must contact your service provider. Maybe he is the culprit behind providing you no internet access. After contacting him, ask to provide you the internet access as soon as possible.
Check for Typos
In the event, wifi.wavlink.com web address is not working, there is no need to reset the extender. Just check for typing errors and ensure the device through which you are accessing the web address is connected to your WavLink WiFi extender.
Have a Quick Nudge at the Connection
There isn’t any need to reset WavLink WiFi extender if you are unable to connect it with your host router. Then? Ensure to keep them (router and extender) closer. Additionally, if you have used an Ethernet cable for connecting them, make sure it is firmly connecting your devices and is free of cuts and other damages.
Check if You have Done WavLink Extender Firmware Update Correctly
Look, not being able to update extender’s firmware or the firmware update file get corrupted doesn’t means that you reset your WavLink WiFi extender. Everything needs to be fixed by basic troubleshooting tips. And, reset is left if no other tips were helpful. So, to prevent firmware-related issues, check if you are connected to your extender, you have downloaded the correct version of the firmware files, you have not interrupted the process, and so on.
In the End
At last, we would like to say, if you face any sort of issues with your WavLink WiFi extender, then before resetting it, try applying the fixes we have provided here. Just in case, none of them help you fixing the issue, you can straightaway opt to reset WavLink WiFi extender. Now, we are going to wrap up this piece of writing. Anticipating that the information we have provided here was useful and helpful to you.
In the end, we would suggest you bookmark this page so that if you face issues with your WavLink WiFi extender again, you will consider this post rather than to reset WavLink WiFi extender.