5 Tips to Fix Wavlink Extender Keeps Rebooting Issue

Being a member of the technical family, Wavlink extenders are likely to become a victim of issues. The Wavlink extender keeps rebooting issue is one of them. Are you also troubled by sudden reboots of your Wavlink extender? If yes, then this post is what you should check in order to get your Wavlink device back to its normal state. So, let’s get going.

Wavlink Extender Keeps Rebooting [Solved]

Experts suggest going for the reboot process first if the Wavlink extender gets affected by any issue. But, we know the pain if rebooting becomes an issue itself. Walking through the points mentioned below will help you fix the Wavlink extender keeps rebooting issue with ease:

Tip 1- Verify Power Supply

Fluctuation in the power supply is one of the major reasons leading you to the Wavlink extender keeps rebooting issue. Electricity fluctuation can occur either due to a faulty wall socket or excessive power outages.

If the wall socket you have used to power up the Wavlink device is damaged, then get it fixed as soon as possible. Don’t want to waste time repairing it? Use another wall outlet to power up the extender. Also, excessive power outages can be taken care of with the help of a UPS.

Tip 2- Check Extender-Router Connection

The improper extender-router connection can also invite the issue you are struggling with. To get the things in your favor, you need to maintain a steady connection between your WiFi devices. However, it completely relies on the source of connection used.

When a wireless source is being used, the distance is the criteria determining the status of the connection between the Wavlink extender and router. Therefore, it must be proper. The term proper here means neither too less nor too much. In the case of a wired source, you have to examine the physical condition of the Ethernet cable. If any cut is found, get it replaced with a new one. Moreover, the wired connection needs to be finger-tight.

Tip 3- Update the Firmware

Like other networking devices, your Wavlink extender is also operated by a set of instructions. These instructions are collectively called firmware. For the extender’s better performance, alterations are done with these instructions. In other words, a firmware update is introduced regularly to keep the Wavlink extender’s performance at the top.

Now the question arises – did you fulfill the responsibility of updating the firmware of your Wavlink extender? Probably not. Otherwise, you won’t be stuck with the Wavlink extender keeps rebooting issue. But, worry not; you can fix the problem by updating the firmware. In case you are unaware of the firmware update process, consider getting in touch with our experts. No matter whether you have done Wavlink AC1200 ap setup or installed any other Wavlink extender, they will help you update your device.

Tip 4- Remove WiFi Interference

The Wavlink extender keeps rebooting issue might also occur if the WiFi signals are either getting diverted or blocked. This blockage or diversion is generally known as WiFi interference. To fix the problem, you need to eliminate it from the surrounding of your Wavlink extender. For this, you can either relocate your Wavlink device or move the WiFi interference-causing factors away.

FYI, you have to ensure that your Wavlink extender is placed nowhere in corners or near concrete walls, televisions, refrigerators, microwave ovens, mirrors, fish tanks, Bluetooth speakers, tracking devices, etc. Apart from this, metal doors and appliances also need to be kept away from the Wavlink range extender.

Tip 5- Avoid Overheating

Last, but not least, your Wavlink extender might also keep rebooting due to overheating. Yes, we understand that being a networking as well as a technical device, your Wavlink extender will produce heat. But, it never means that you can put it at the risk of overheating.

Overheating occurs if your Wavlink extender is operating at temperatures higher than its working temperature. To prevent that, you need to select a cool and well-ventilated room in your home for the Wavlink extender. Also, dust off the dirt (if accumulated) on the air vents of your Wavlink extender.

Final Words

The Wavlink extender keeps rebooting issue is quite common these days. However, by implementing the correct troubleshooting technique, this issue can be fixed easily. Hopefully, the aforesaid tips will help you get the problem resolved. In case you are still facing the Wavlink extender keeps rebooting issue, contact our professionals without any delay.