How to Troubleshoot Wavlink Router Blinking Red Light Issue?
“Why am I facing Wavlink router blinking red light issue? You know what, I am unable to do anything, like can’t connect the router to my PC, update its firmware, access wifi.wavlink.com, and so on. The list of issues doesn’t end here! This annoying red light has decided to disturb me anyway. Please help me! Otherwise, I would end up throwing the router into my trash!” – An annoyed Wavlink router User!
Are you also baffled by the issue? Do you want fixes to troubleshoot it? If you nod in yes, then this how-to guide is written for you! Here, we have jotted down some utmost fixes to take you out of the issue permanently. So, are you ready? Let’s get down to troubleshooting the issue right from the comfort of your home!
Reasons: Wavlink Router Red Light Issue
Wait a minute! Before you jump on the fixes, don’t you want to know the reasons behind it? Well, knowing the reasons (recommended) prior to applying the fixes will be helpful. So, scroll down a little and have a quick nudge at the reasons giving you the issue in discussion:
- Reason 1: The Wavlink router is placed in an inappropriate location
- Reason 2: Your internet connection is not working fine
- Reason 3: The router setup process is not performed in a proper way
- Reason 4: Router’s firmware is outdated
- Reason 5: Due to technical glitches, your router’s LED may be forced to blink red
So, you have the utmost reasons handy for causing the “Wavlink router blinking red” issue, don’t you? Now, scroll down a little and look at the fixes outlined below. Understand the fixes first! Understand how to apply them! And, once you are done with it, the issue you are currently facing will be solved already.
Let’s Fix Red Light Issue with Wavlink Router
The Placement
First, try changing the current location of your WiFi router to see if this hack works for you. In case, it works, then there isn’t any need to apply the rest of the fixes! Still, we suggest you bookmark this post (recommended). Just in case, you face the same issue again, you will have the fixes to apply at your fingertips. And, doing so, means bookmarking this post will save precious moments of your life in search of the fixes for the same issue.
Where am I suppose to place the router?
Your router must be placed somewhere in a higher or airy (well-ventilated) location in your home. In addition to that, avoid placing the device in discussion inside your show window/ almirah, back of your client device (PC or laptop), or beneath your computer or study table.
The Internet Connection
Is your internet connection working fine? We guess not! Troubleshooting the issue will be easy for you if you verify your internet connection. You don’t have to do anything – just ensure that the connection you have is working smoothly. That’s it! To fix this thing, you can restart your modem and see if it works for you.
So, build a secure and finger tight connection between them using a wire/ Ethernet cable. Or, if you want to connect them wirelessly, you are free to do that as well.
Now, try accessing wifi.wavlink.com! Are you able to access wifi.wavlink.com? If your answer is a big no, then it could be because of unstable router-modem connection or poor internet, ot because of the “Wavlink router blinking red” light issue, right? So, ensuring a good connection between them will help you reach the setup page.
The Setup Process
Still baffling with the same red light issue? OMG! What’s going on! The “wavlink router blinking red” light issue is leeching you like a parasite! Need not worry! We are here to help you always and in any manner! Just do one thing – reset your Wavlink router! One and only reason behind suggesting you reset your router is improper or incomplete setup. Look, the red light issue is also caused by partial Wavlink router setup or if you have not performed it in a correct manner.
So, first reset your router by pressing and holding the reset button on it, holding it for a few seconds, and releasing it after that.
Thereafter, set up your router from scratch by accessing the Wavlink router firmware update page via wifi.wavlink.com web address, and Wavlink router login password. After logging in, apply the on-screen instructions to complete the process with ease.
The Router’s Firmware
The very next thing that you need to do after setting up your Wavlink router is to update its firmware. It will help improve your router’s performance, enhance existing internet speed, and more! Apart from this, if you further encounter the red light issue, updating the router’s firmware will eventually help you keep the “Wavlink router blinking red” light issue at bay from your device.
The Technical Glitches
One of the utmost yet major reasons causing the red light issue – “technical glitches”! The glitches are the ones that cause many router-related issues apart from the one you are presently experiencing! To get rid of it, just restart your router.
And, how are you supposed to do that?
- Simply disconnect your router from the modem! And, also you are supposed to disconnect the router from your client devices like PC, laptop, iPhone, iPad, and more.
- Once you are done applying the disconnecting process, turn the router off, wait for 15 minutes, and turn it back on. A steady power supply from a working wall outlet to the router is a must.
- Ensuring a stable power supply to your Wavlink device, reconnect it to your modem, and your client devices. The LEDs on the router will start blinking green for sure.
Conclusion
Our post on how to troubleshoot “Wavlink router blinking red” light issue comes to an end now. We really hope that you are not blowing a fuse anymore by applying the fixes provided here. Kindly share your answer! And, if you have more fix (s) to overcome this issue, let your fellow readers apply your hack!+